ReVive
Forgiving application. Use as a topper over existing coatings, or standalone for short-term protection.
01. What It Is & Who It's For
Versatile. Forgiving. Professional.
ReVive is a versatile ceramic product built on the same polysilazane platform as Dragon Pro and AutoCoat — but formulated with a reduced active content that makes it more forgiving to apply. It is designed for two distinct use cases: as a topper coat over an existing ceramic base, or as a standalone short-term coating when applied with proper technique.
For experienced professionals, ReVive is the maintenance layer that keeps a Dragon Pro or AutoCoat install performing at its best. For newer installers, it is a genuine introduction to ceramic coating chemistry — with a working window that gives you room to learn without the pressure of a high-stakes install.
As a Topper
Adds slickness, gloss, and a refreshed layer of protection over Dragon Pro or AutoCoat. Recommended monthly for maximum performance, or every 6 months at minimum.
Standalone
When applied with proper coating technique, ReVive provides durable short-term protection — approximately 5 months under typical conditions — on any compatible hard surface.
02. Core Chemistry
Same Platform. More Forgiving.
ReVive is built on the same organopolysilazane backbone as Dragon Pro and AutoCoat. The chemistry is the same class — a reactive polymer that converts with atmospheric moisture to form a cross-linked ceramic matrix. The difference is in the active content: ReVive is formulated at a reduced concentration, which extends the working window and makes the application more forgiving without sacrificing the fundamental bond chemistry.
ReVive uses the same polysilazane platform as the professional coatings in the Seahorse lineup — not a watered-down SiO2 spray. The reduced active content is a deliberate formulation choice for versatility and accessibility, not a compromise on chemistry.
Compatible with all hard, non-porous surfaces: paint, gelcoat, glass, wheels, chrome, and interior hard surfaces. Not for convertible tops or fabric.
03. Working Window
Faster Flash. Easier Leveling.
ReVive flashes sooner than Dragon Pro or AutoCoat — which is by design. As a topper or short-term coating, it is typically applied in smaller sections with a faster turnaround. The shorter working window keeps the install moving efficiently without the extended dwell time of a full base coat application.
Reference Working Time
ReVive typically flashes in approximately 3–5 minutes before leveling, depending on conditions.
⚠ Temperature, humidity, and airflow all affect this window. Always test a panel in your specific conditions before committing to a full install.
The same bottom-up bonding principle applies: cross-linking begins at the surface interface immediately while the top layer remains workable. By the time you level, the foundation is already chemically engaged with the substrate.
04. Technical Snapshot
At a Glance
| Chemistry | Polysilazane-based platform (reduced active content) |
| Working Time | ~3–5 min reference. Condition-dependent. Always test first. |
| Durability | ~5 months typical (standalone). Varies with environment and maintenance. |
| Use Case | Topper over existing ceramic base, or standalone short-term coating |
| Surfaces | Paint, gelcoat, glass, wheels, chrome, interior hard surfaces. Not for convertible tops or fabric. |
| Shelf Life | 18 months unopened. 30 days once opened. Keep sealed and cool. |
| Skill Level | Accessible for newer installers. Recommended for all experience levels. |
05. Application
Step-by-Step Summary
06. Cure Guidance
After Application
Also in the Lineup